Surface Preparation
Shot Blasting for Steel Plate Parts
Shot blasting can be included when rust removal or coating preparation is part of the confirmed order scope. If a specific cleanliness standard such as Sa 2½ is required, state it explicitly in the project specification rather than assuming it applies to every order.
Specifications
Shot blasting capability reference.
Reference ranges — feasibility and part size confirmed during manual review.
| Parameter | Specification | Notes |
|---|---|---|
| Surface standard | Sa2.5 (Near white metal) | ISO 8501-1 reference — confirmed per order |
| Maximum part size | 2700 × 8000mm typical | Oversize parts reviewed at quotation |
| Typical application | Pre-coating surface prep | Paint, primer, protective coating adhesion |
| Combined with cutting | When in scope | Applied after cutting and deburring when confirmed |
When Shot Blasting Is Needed
Common applications.
Coating Prep
Paint & Protective Coating
Surface profile for industrial coating adhesion when specified in scope.
Rust Removal
Hot-Rolled Plate Cleaning
Mill scale and oxidation removal on hot-rolled plate when required.
Combined Order
Cut, Finished, Blasted
Can be combined with cutting and finishing in one order when confirmed.
Navigation
Related capability pages.
Capabilities hub → · Secondary processing → · Surface finishing → · Inspection process → · Quotation process → · Contact →
No on-page drawing upload. No drawing files are stored on this website.
Shot Blasting Inquiry